Frequently Asked Questions

In most cases, a container dome is considered a relocatable or temporary structure, which means it typically doesn’t require council approval. However, every council has its own rules and regulations, so it’s always a good idea to check in with them to make sure you’re on the right track and can pick the right size that suits best.

We recommend giving your local council a quick call or visiting their website to learn about any specific requirements they might have. This way, you can enjoy peace of mind knowing you’ve covered all the bases before setting up your dome shelter.

To install a Container Dome Australia (CDA) product, you’ll need a few essential tools and some equipment to make the process smooth and efficient. Basic hand tools will be necessary to handle the smaller tasks, and you’ll also need access to an Elevated Work Platform (EWP) and a crane to manage the larger components and safely secure the dome in place.

Don’t worry if this sounds a bit daunting, because our team is here to guide you through the process and can provide recommendations if you need help sourcing the right equipment. If you have any questions about installation, just let us know — we’re always happy to assist!

Yes, in most cases, it’s important to anchor both the domes and the containers when setting up your shelter. Proper anchoring helps ensure the stability and safety of your structure, especially in windy or challenging conditions.

If you’re unsure about the anchoring requirements for your setup, our team is here to guide you through the process and recommend the best approach for your specific location and needs. We’re always happy to help!

The ease of installing a container dome depends on a few factors, like the size of the dome, any site preparation needed, and the accessories you’ve chosen. That said, our domes are designed for quick and straightforward installation, thanks to the included base rail system.

When you purchase a dome, we’ll provide you with detailed instructions and drawings to guide you through the assembly process. And if you run into any challenges along the way, our technical support team is just a call away and ready to help.

No, unfortunately, we can’t do that. Our qualified install team are expert at installing CDA domes only. Because each company has their own design, we can’t work with products from other suppliers that may have very different design setups. Remember, though, that our shelters are manufactured with simple installation in mind, so if you buy a Container Domes product, you can consider DIYing the setup if you’d like!

When you contact our team for more information or a quote, we’ll ask for your suburb or the location you’re buying a dome for so we can provide you with the latest and most accurate details and quote. In Australia, we have four different wind regions based on the varying windstorm types typical to each zone.

Our dome shelters all have applicable Wind Region Ratings, which means they’re engineered to withstand the wind loads as set out under the Australian Standards, AS/NZS 1170:2:2021. You can learn more about wind regions and why they matter via our detailed guide to Australian wind ratings.

The main difference between the Twistlock Mount and Weld-On Mount options comes down to ease of installation and whether hot works are allowed.

Our Twistlock bracket system is an alternative mounting solution that’s designed to lock the base rail securely into the corner castings of the shipping container. This makes installation faster and easier, as there’s no need for welding or other hot works. It’s a great option if you want to avoid modifying or damaging your containers. Twistlocks are an optional extra and come at an additional cost, but the time and effort saved during installation usually make up for it.

On the other hand, the Weld-On Mount option involves welding the base rails directly to the containers. This option comes standard with all shelters and works well for applications where hot works are permitted. Both systems are reliable, so just choose the one that best suits your project needs!

The largest span in our standard dome range is 21 metres. However, we have manufactured domes that were up to 50 metres wide in the past. If you’re after a large span shelter, just give us a call and we’ll discuss your needs and offer some solutions.

Yes, we can! We’re always happy to prepare a custom quote for clients who need them. Simply contact us on our website or give us a call and we’ll start working on some custom specifications to suit your specific requirements.

Certainly! This is easily achieved with the addition of our “over strip” accessory, which ensures maximum waterproofing for end-to-end solutions.

Absolutely! We’re happy to supply retrofit end walls for any CDA-branded dome. However, we’re unable to provide parts for non-CDA domes, as we can’t engineer components for shelters made by other companies. If you have a CDA dome, though, just let us know, and we’ll help you get the right end walls to complete your setup!

Although we do not offer payment plans or finance, we do offer various payment terms depending on your company’s requirements. Our standard payment terms are 25% deposit upfront and then the remainder of the balance upon manufacture completion.

No, sorry. Our container domes are available for purchase and hire-to-buy only. We do not offer our container domes for any short-term rental supply needs.

We work closely with a large network of trusted container suppliers who are always ready to help us provide high-quality shipping containers. If you need shipping containers along with or instead of a dome, we’re more than happy to assist. Just get in touch, let us know your requirements, and we’ll take care of the rest!

No, we’re sorry but our covers are specially designed to fit our own products. For covers to suit domes from other manufacturers, our recommendation is to go back to your original provider to request replacement parts.